YOU'RE ALMOST READY TO HANG YOUR NEW PLANT WALL!
Here are a few things you’ll need before getting started
• Screw driver
• Level (smartphones work too!)
• Tape Measure
• A potted plant
• A friend! The plant wall is best assembled with two people.
WHAT’S INCLUDED IN YOUR KIT FOR ASSEMBLY
• Flexible trellis (x1)
• Small white screws (x4)
• Mounting hooks (x2)
• Metal bracket (x1)
• Self drilling anchors (x4)
• Standard wall anchors (x4)
• Large black screws (x4)
• Leather plant hanger (x1)
1. Select Your Wall
Find a spot in your home to hang the plant wall. The plant wall can go almost anywhere, but must be placed in a space that has natural light (no windowless rooms, please).
2. Mount Trellis
Mark two points on the wall where the trellis mounting hooks will go (Item 1). We recommend spacing the hooks 3 feet apart. Hooks must be placed at the same height on the wall to ensure the plant wall is level. Screw mounting hooks (Item 1) into the wall using white screws. Each hook requires 2 screws. Hang the trellis (Item 2) on mounting hooks to secure to the wall.
3. Position Metal Bracket
Position the metal bracket (Item 3) near the top corner of the trellis, opposite the light source - your plant will grow across the trellis towards the light (i.e. if your windows are to the left, position your plant on the right side of the trellis). Hold the base of the bracket to the wall and mark all four holes.
4. Install Metal Bracket
Using your screwdriver, screw the self drilling drywall anchors (Item 4a) into the marked holes. Note, these do not require a drill. Then, using 4 black screws (Item 3), attach the metal bracket to the wall. *We've also included standard wall anchors (Item 4b) in your kit. These can be used in place of the self drilling drywall anchors, but will require a pre-drilled hole. We recommend a 3/64" drill bit.
5. Hang Plant
Place your potted plant into the leather hanger; carefully section the plant as needed. Remove the end cap from the metal bracket and slide the hanger onto the bracket. Twist the end cap back onto the bracket to secure.
6. Design Your Wall
Now for the fun part! Thread the vines of your plant through the trellis. There is no right or wrong way to do this. As the plant grows it will continue to weave through the trellis on its own.